Compute Module • CM4 boot stops with BOOT ERROR: Code 45

Hi all,

I have a CM4 with the official IO-Board that worked for some time and now I try to reuse it for a different project.

Before I reinstall it (Target is Fedora 40 Server on a NVME) , I updated the Firmware to the version 2024-07-30 following the documentation at https://www.raspberrypi.com/documentati ... bootloader. I don't know which version was installed before. Sorry.

After cloning and make. I run sudo ./rpiboot -d recovery and after the green screen. I poweroff the pi, remove the jumper and power on again.

After that I recieve the following error (see attached picture): (The timer stops a 0:02)
Unexpected error 0 0x0008df6c
BOOT ERROR: code 45 - "Fatal firmware error'

The internal eMMC is empy. no other devices (expect HDMI) are connected.

I also tried the following versions (with error address)
2024/09/05 0x0008df6c
2024/01/18 0x0008c9be
2023/05/11 0x0008c9be

Can some give me a hint how to fix this? Or can some tell me how to lookup the address?

Thanks
CU
Jens

P.S.: The write looks good:

RPIBOOT: build-date Oct 26 2024 version 20240422~085300 c944557b
Loading: recovery/bootcode4.bin
Waiting for BCM2835/6/7/2711/2712...
Loading: recovery/bootcode4.bin
Sending bootcode.bin
Successful read 4 bytes
Waiting for BCM2835/6/7/2711/2712...
Loading: recovery/bootcode4.bin
Second stage boot server
Loading: recovery/config.txt
File read: config.txt
Loading: recovery/pieeprom.bin
Loading: recovery/pieeprom.bin
Loading: recovery/pieeprom.sig
File read: pieeprom.sig
Loading: recovery/pieeprom.bin
File read: pieeprom.bin
Second stage boot server done

Statistics: Posted by JensKuehnel — Sat Oct 26, 2024 10:17 pm — Replies 0 — Views 35

---