I have three of these in my home (as baby monitors). One just stopped. I've tried different boards and different cables. I think I've determined it's a fault with the camera unit itself.
When I run picam-hello I get:
Any ideas?
Can these just die after a year or two?
When I run picam-hello I get:
Code:
will@pi5:~ $ rpicam-hello[0:00:32.689643479] [1894] INFO Camera camera_manager.cpp:325 libcamera v0.3.2+99-1230f78d[0:00:32.697199424] [1900] INFO RPI pisp.cpp:695 libpisp version v1.0.7 28196ed6edcf 29-08-2024 (16:33:32)[0:00:32.716238016] [1900] INFO RPI pisp.cpp:1154 Registered camera /base/axi/pcie@120000/rp1/i2c@88000/imx219@10 to CFE device /dev/media1 and ISP device /dev/media0 using PiSP variant BCM2712_C0Made X/EGL preview windowMode selection for 1640:1232:12:P SRGGB10_CSI2P,640x480/0 - Score: 4504.81 SRGGB10_CSI2P,1640x1232/0 - Score: 1000 SRGGB10_CSI2P,1920x1080/0 - Score: 1541.48 SRGGB10_CSI2P,3280x2464/0 - Score: 1718 SRGGB8,640x480/0 - Score: 5504.81 SRGGB8,1640x1232/0 - Score: 2000 SRGGB8,1920x1080/0 - Score: 2541.48 SRGGB8,3280x2464/0 - Score: 2718Stream configuration adjusted[0:00:34.910315339] [1894] INFO Camera camera.cpp:1197 configuring streams: (0) 1640x1232-YUV420 (1) 1640x1232-BGGR_PISP_COMP1[0:00:34.910454689] [1900] INFO RPI pisp.cpp:1450 Sensor: /base/axi/pcie@120000/rp1/i2c@88000/imx219@10 - Selected sensor format: 1640x1232-SBGGR10_1X10 - Selected CFE format: 1640x1232-PC1B[0:00:35.961128144] [1900] WARN V4L2 v4l2_videodevice.cpp:2127 /dev/video4[16:cap]: Dequeue timer of 1000000.00us has expired![0:00:35.961189351] [1900] ERROR RPI pipeline_base.cpp:1366 Camera frontend has timed out![0:00:35.961197871] [1900] ERROR RPI pipeline_base.cpp:1367 Please check that your camera sensor connector is attached securely.[0:00:35.961205749] [1900] ERROR RPI pipeline_base.cpp:1368 Alternatively, try another cable and/or sensor.ERROR: Device timeout detected, attempting a restart!!!Can these just die after a year or two?
Statistics: Posted by uilfut — Thu Jan 30, 2025 8:35 pm — Replies 0 — Views 20