Troubleshooting • Cannot find Thonny workbench.py
HiI am looking to do some changes to thonny and I need to change the workbench.py. I cannot find the file! Does anyone know its full path?It's for a Pi 3B+.ThanksStatistics: Posted by Talby — Mon Aug...
View ArticleAdvanced users • Pi 5 - dwc2 not working
I am trying to get a new Pi 5 board to work as a USB Gadget. It has a combined NVME/PoE hat for power and SSD.I am looking for suggestions on what I am doing wrong or not doing.Thanks!I have this...
View ArticleSDK • stdin blocks USB IRQ5 ?
Hello all,I've written an interrupt-driven USB stack for CDC/Serial connections.Everything is predicated on USB buffer completion interrupts on IRQ5.It's working well for printf and getchar_timeout_us...
View ArticleTroubleshooting • Raspberry PI 5 green light
Hello, I also have a problem with raspberry , I wanted to change the paste on the processor and add a new cooler, after I mounted the cooler, it no longer displays anything on the screen what did i do...
View ArticleGeneral discussion • applications in fullscreen
Hi,I have installed PlanetCNC on my Raspberry PI 5, and all is working OK. So far so good.Now I am trying to startup PlanetCNC at boot level and in fullscreen.Starting up at boot level is possible...
View ArticleTroubleshooting • [BUG]Bookwoorm: Pi2 No UART possible on GPIO14/15
Hello Pi Friends,with the latest bookworm version (2024-07-04) on my Raspberry Pi 2 Model B, I did not get the UART to work on the GPIOs 14/15.I want to use the UART to log some microcontrollers.But...
View ArticleClik here to view.
General programming discussion • 24 Minute Sun Simulation
I have a slot cat track and would like to run two strips of RGB LEDs of 402 LEDs each. That's 804 LEDS total but they mimic each other. With these 402 (x2) I want to simulate a full day in 24 minutes...
View ArticleBeginners • Advice on my custom fstab ?
Hello friends,I made some customization in my /etc/fstab.It seems to work fine for my use case.The size of all tmpfs are OK for the moment.What do you think about it ?Do you see something that may be...
View ArticleBeginners • Raspberry Pi 5 Cluster case that accounts for POE Hat.
Hello, I'm looking for a cluster case that can house up to four rapsberry pi 5's and will accommodate the use of the Waveshare Poe HAT (F). I've been scouring the internet for possible solutions and...
View ArticleTroubleshooting • Pi5 temp variation?
I have 2 identical Pi5 setups with the same case, and software load. One is running 5 degrees C hotter on CPU and 10 degrees hotter on composite. If anything the load is slighter lower on the one...
View ArticleRaspberry Pi OS • Bluetooth Notifications
I'm using the latest Bookworm on a Pi 4. I ported over a QT application that had been running on Buster on a Pi 3. The porting went very well, and the application runs as expected. The application...
View ArticleRaspberry Pi Connect • RaspberryPi Connect not working
Hi, Apologies as I'm new to RaspberryPi/Linux as a whole.Attempting to get Raspberry Pi connect to work, it was working and I could remote into my headless pi and use remote shell. However whatever...
View ArticleGeneral • Is SPI Slave (on Pico2) still fubar'ed?
Just got some Pico2's and have been testing out the SPI Master/Slave examples. It appears that the CS# line still has to transition from a logic low to high after every 8 bits sent from the SPI Master...
View ArticleGeneral • RISC-V start of executable, interrupt vectors
Am I correct that one has to use the the 1BS_ENTRY_POINT Meta Block in the image to determine where execution should start and how the stack is initialised ?It seems that Interrupt Vector Tables are...
View ArticleTroubleshooting • Raspberry pi 3 with 5 inch screen MPI5008
Hello! some time ago i got a 5 inch chinese screen for a proyect that never got to live tbh.The thing is, i got a new proyect at hand and wanted to use the screen with the touch capabilities that it...
View ArticleRaspberry Pi Connect • Unable to read device serial number from...
Hi There!Followed the instructions to install Raspberry Pi Connect and got as far as:Use the following command to generate a link that will connect your device with your Connect account:Code:...
View ArticleTroubleshooting • Pi4 doesn't connect to wifi after reboot
I have a Pi4 that has been connected to my wifi network for a while without any problems. Then I needed to update its OS from Debian 10 (Buster) to Debian 11 (Bullseye), so I followed the steps to...
View ArticleAdvanced users • PPS not working on Bullseye
Just put together a new Pi, 4B - Raspberry Pi 4 Model B Rev 1.5 running Raspbian Bullseye 11.10. It has Adafruit Ultimate GPS hat on it, with MKT3333 Globaltop chip. I have the same hat on a 2b+ that...
View ArticleSDK • SDK 2, VS Code + Pico extension, where are PIO examples
My congratulation to the team for the ease of use with SDK 2 and RPi OS + VS Code + Pico extension. Is there a plan to add all the examples missing from "New Project from Examples" selection...
View ArticleClik here to view.
Troubleshooting • Connected thermal printer keeps changing URI
I have a weird issue where the receipt printer connected to the pi keeps "losing connection" if the pi is rebooted, and what I've noticed is that when that happens, and then I try to add a new...
View Article