General • Trouble soldering picow
I'm new to soldering, I purchased a Hakko fx-888. I have some 60/40 lead solder as well as lead free. I am trying the lead solder as folks have said that is easier for beginners.I turn on the Hakko,...
View ArticleRaspberry Pi Connect • Default Resolution
I have done some testing using multiple devices that use different resolutions and found that sometimes this does not work very well. I had a phone connected first and then a laptop second. Correct me...
View ArticleBeginners • thermal throttling OS based or hardware based ?
Hi,I have a raspberry pi 4 and a raspberry pi zero 2w both runing on alternative os, not the official one.I don't have any heatsink installed, and I want to be if the thermal protection is working...
View ArticleTroubleshooting • FTP server config for anonymous and remote access
Hello All,I'm following the instructions for FTP setup here :https://pimylifeup.com/raspberry-pi-ftp/Made some modifications to account for local names and desired anonymous access.Yet, from other PC...
View ArticleBeginners • Set-up with pre-installed Bookworm on MicroSD from Reseller
Hello,If I buy a micro SD with Raspberry OS Bookworm on it when I buy a new Raspberry Pi 5 will I still need a USB keyboard and mouse for set up?I don't have a USB keyboard and mouse and have no way...
View ArticleFor sale • Data processing/data routing software for Raspberry Pi (Free)
Hi, I'm not sure where this fits so posting it here. For sale for zero dollars, we now have an IoT software module geared towards data processing and control and would like to ask for feedback from...
View ArticleClik here to view.
Troubleshooting • Rasberry pi 5 problems after updating
please note that I'm not in any way technical, and my pi 5 was doing just fine before I updated itbut ever since, it isnt doing fine, and I'm wondering if it was indeed the update and can it be fixed...
View ArticleClik here to view.
Troubleshooting • Random lockup - bluetooth or time related?
Raspberry pi 3b+ crashes after months of running fine. Why would the pi seemingly unsuccessfully try to reboot on it's own and why would the timestamp change when bluetooth is initializing? Is...
View ArticleTroubleshooting • Stopped being able to access the internet although I'm...
My raspberry pi has suddenly stopped accessing the internet. It is successfully connected to the wifi. Everything looks good on the side of the router.I have:Raspberry Pi 5Bookworm 64-bitI've...
View ArticleGeneral discussion • Gpio 14 wire (txd) in gpio 19 or gpio 18 pin?
I don't wanna ruin my fan or raspberry pi .My fans instructions say to put the txd wire in gpio 14 but I can't control it then and the only way you can control the fan via uefi is gpio 18 or...
View ArticleHATs and other add-ons • M.2+ Hat nvme not being recognized.
Hi, I recently purchased the M.2+ hat along with a 1tb nvme from the raspberry pi store. I'm trying to get it to boot on my new pi5, but for some reason it fails to recognize the device. I went...
View ArticleTroubleshooting • Driven insane by gremlins in connection between Pi4b and Pico
I'm trying to have the pico write to serial and the pi read it.I am powering VSYS and GND on the pico with 5V (also tried 3V3) and GND from the pi4. Going between GP0/GP1 (default) (also tried all...
View ArticleTroubleshooting • Same I2C Address keeps remaining
Same I2C address 0x1A appears everytime eventhough there is nothing connected to the pi. When i try to connect ADS1115 to my pi probably i did something wrong especially given the fact that I did not...
View ArticleClik here to view.
Networking and servers • Bookworm DHCP server and bridge
Pi 4. Bookworm. Latest version. All updates. Trying to set up a DHCP server using a script.Back in the dim dark ages of pre NetworkManager, I just used the Neanderthal approach of writing simple...
View ArticleRaspberry Pi OS • Latest arm64 Paspberry Pi OS checking for armhf package
I installed Brave browser on my RPi5 with 64 bit OS. Now when I do 'sudo apt update' it throws message that Brave repo doesn't support armhf architecture. Why do we need armhf support on arm64...
View ArticleTroubleshooting • Raspberry Pi Zero 2 W OTG Issues
I have been attempting to setup a new zero 2w as a pwnagotchi, but have been having consistent issues with OTG connection for SSH.I have successfully gotten my computer to recognize the Pi as an rdnis...
View ArticleClik here to view.
Raspberry Pi 400 • Raspberry pi 4 overclocked to 3.4ghz
Chat is this real ?? or just a bugI added 3400 as arm freq in config.txtStatistics: Posted by asutosh5941 — Fri Jun 21, 2024 7:40 am — Replies 0 — Views 30
View ArticleCamera board • picamera module 3 AF not working in downwards/overhead direction
Hello there,I did some focus testing with picamera module 3 and compared the maximum sharpness (FocusFoM) reached in a LensPosition walk with the sharpness of where AF ended up.In straight forward...
View ArticlePython • Script for waveshare relay module
Hi all, Just a little problem I am hoping someone can solve for me. I am new to all this, so please bear with me. I have a pi3B with a 3 relay hat fitted above a a pi DAC HAT. I want to control my...
View ArticleGeneral discussion • Raspberry Pi 5 Kernel Graphics Driver Support
Hello,Referring to this article "Raspberry Pi 5 Kernel Graphics Driver Support Will Hopefully Be Upstreamed Soon" :https://www.phoronix.com/news/Raspberry ... l-DRM-SoonSince RPiOS sadly only works...
View Article