General • Getting Started with Raspberry Pi Pico W
Hi, I'm just getting started with Pico W to integrate a couple of sensors and actuators generally in Arduino I was able to import each sensor's library and then use the functions present in them but...
View ArticleGeneral discussion • Raspberry PI industry integrators forum?
Hi there, I'm an experienced software developer looking to create a product based on Raspberry Pi.I'm aware of https://www.raspberrypi.com/for-industry/ but I don't see a forum or am I expected to...
View ArticleTroubleshooting • rtlsdr: Failed to enable unit:...
I'm trying to use an SDR dongle attached to a Pi3 as an RTL TCP server. I've followed this https://github.com/c4software/raspberry-rtlsdr-serverBut as this doesn't quite work as-is I've also followed...
View ArticleOfficial Display • Inverted Screen for Raspberry Pi 2 Model B (Rev 1.1) with...
Hello, everyone.I am having a problem with my Raspberry Pi 2 Model B Rev 1.1 and the official display. I've been using this arrangement without issue for a while, however after installing Raspberry Pi...
View ArticleBeginners • The Pi5, new HAT - how to dd image from SD-card
Hi.. I have just ordered the new Raspberry Pi M.2 HAT and SSD disk.. Today I am booting from a SD-card, using the Pi5 as a server (ZFS fileserver) and also installed Netdata, by compiling the Netdata...
View ArticleRaspberry Pi OS • Disabling Pop-up Windows
Hello! I'm wondering if it's possible to disable pop up windows that can only be closed by manually pressing "ok" button. More specifically I want to close/disable a window that appears when you...
View ArticleRaspberry Pi OS • How to use PXE_OPTION43
I have a Raspberry Pi 4B running bookworm successfully network booting from a PC running Debian 12.My question is about the PXE_OPTION43 in the bootloader configuration. In the documentation it states...
View ArticleTroubleshooting • Pi-Apps installed but nothing in Menu?
Hello, my Raspberry Pi 5 Desktop installed GIMP and Inkscape via Pi-Apps, however nothing is showing in Menu -> Graphics?Terminal -> gimp -> shows nothing?Any suggestions how to install GIMP...
View ArticleCamera board • Raspberry Pi 4B with Camera V2.1 ***no cameras available***...
Hi everybody,I have Raspberry Pi 4B with Camera V2.1 and when i use the command Code: libcamera-hello i get the output:Code: Preview window unavailable[0:12:43.726756725] [943] INFO Camera...
View ArticleClik here to view.
Troubleshooting • Assistance Needed for Using Huawei E3372-325 USB 4G Dongle...
Hello everyone,I need assistance with using a Huawei E3372-325 USB 4G Dongle on my Raspberry Pi device. Currently, the dongle is detected as a CDROM, and I am having difficulty switching it to modem...
View ArticleGeneral discussion • Powering multiple RPi with 300W PSU
Hello,I'm thinking of powering two raspberry pi 5 boards, both with nvme ssd storage and a raspberry pi 4 that has all kinds of peripherals (I get undervolt warnings on it when it's booting up with...
View ArticleGeneral discussion • Raspberry Pi 5 - Wifi not working after nvme boot
I previously booted the raspberry pi 5 using SD Card.i recently upgrade my boot drive to nvme. I use geekworm X002 NVME hat and Lexar M.2 Nvme.I noticed my wifi not working after few minutes boot from...
View ArticleGeneral discussion • Full disk encryption (large NVME-drive)
What would be the easiest way to fully encrypt a larger NVME-drive (1TB+) with LUKS? I have successfully used https://github.com/gitbls/sdm/blob/mast ... ryption.md to encrypt my 128 GB SD-card, but...
View ArticleBeginners • Unable to flash and use PICO on Mac
Hi all,I just got a Waveshare RP2040-zero and I'm unable to use it with Macos Sonoma 14.5.I've read all the tuttorials on how to, including holding the "bootsel" button, using Arduino IDE, installing...
View ArticleAutomation, sensing and robotics • Connecting a LD2410 radar sensor to a...
I am trying to connect an LD2410 radar sensor to my RaspberryPi with the following connections:VCC to Pin 2(5V)GND to Pin 34(GND)TX to Pin 10(GPIO 15 RX)RX to Pin 8(GPIO 14 TX)Out to Pin 12(GPIO 18)I...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • CM4 UART issues when migrated from...
Hi,I used CM4 UART (GPIO4 = TXD3, GPIO5 = RXD3) with Bullseye. It worked well. Now migrated my image to Bookworm and can read/write to/from that UART.I see all UARTs activated: with Bullseye I used...
View ArticleGeneral discussion • Can I charge phone with rpi power suply
I have a honor 8x which have micro usb and power suply 5v 2a, can I charge my phone with original rpi power suply which have 5v 2.5a?Statistics: Posted by MrCaramba — Fri Jul 05, 2024 10:49 am —...
View ArticleTroubleshooting • Raspberry pi 5 no boot only red led
I just recently purchased raspberry pi 5 with Official Raspberry Pi 5 27W USB-C PD Power Supply also brand new sdcard 128gb i used official raspberry pi imager to flash memory card and after that when...
View ArticleRaspberry Pi Connect • rpi-connect-lite terminal disconnects
There seems to be a disconnection timeout in the terminal session.When I connect from a web browser, I get randomly disconnected, even if the Pi is busy on a long operation. I can only assume it is...
View ArticleTroubleshooting • Bluetooth keyboard pairs but doesn't connect
I am running a Raspberry Pi 4B with Pi OS. I use a mouse over USB and a keyboard over Bluetooth. Works fine. But I wanted to use a smaller keyboard with a touchpad. It pairs, but then it doesn't...
View Article