Hello,
On 05-14, I installed updates via GUI, after which Rasp OS stopped booting (not accessible over the network). Upon booting, it loads to a black screen with the "_" symbol and does not respond to any input. Without the SD card, the bootloader loads and attempts to boot from USB/SD or netboot. There is 37GB+ of free space on the SD card. I connected the card to a laptop with Debian, and both bootfs/rootfs partitions are intact. Here is the log of the updates installation:
2024-05-14 00:44:57 startup archives unpack
2024-05-14 00:44:58 upgrade dpkg:arm64 1.21.22 1.22.6~bpo12+rpt1
2024-05-14 00:44:58 status half-configured dpkg:arm64 1.21.22
2024-05-14 00:44:58 status unpacked dpkg:arm64 1.21.22
2024-05-14 00:44:58 status half-installed dpkg:arm64 1.21.22
2024-05-14 00:44:59 status triggers-pending man-db:arm64 2.11.2-2
2024-05-14 00:44:59 status unpacked dpkg:arm64 1.22.6~bpo12+rpt1
2024-05-14 00:44:59 startup packages configure
2024-05-14 00:44:59 configure dpkg:arm64 1.22.6~bpo12+rpt1 <none>
2024-05-14 00:44:59 status unpacked dpkg:arm64 1.22.6~bpo12+rpt1
2024-05-14 00:44:59 status half-configured dpkg:arm64 1.22.6~bpo12+rpt1
2024-05-14 00:45:00 status installed dpkg:arm64 1.22.6~bpo12+rpt1
2024-05-14 00:45:00 startup archives unpack
2024-05-14 00:45:00 upgrade dpkg-dev:all 1.21.22 1.22.6~bpo12+rpt1
2024-05-14 00:45:00 status half-configured dpkg-dev:all 1.21.22
2024-05-14 00:45:00 status unpacked dpkg-dev:all 1.21.22
2024-05-14 00:45:00 status half-installed dpkg-dev:all 1.21.22
2024-05-14 00:45:01 status unpacked dpkg-dev:all 1.22.6~bpo12+rpt1
2024-05-14 00:45:01 upgrade libdpkg-perl:all 1.21.22 1.22.6~bpo12+rpt1
2024-05-14 00:45:01 status half-configured libdpkg-perl:all 1.21.22
2024-05-14 00:45:01 status unpacked libdpkg-perl:all 1.21.22
2024-05-14 00:45:01 status half-installed libdpkg-perl:all 1.21.22
2024-05-14 00:45:02 status unpacked libdpkg-perl:all 1.22.6~bpo12+rpt1
2024-05-14 00:45:02 upgrade pixflat-theme:arm64 0.17 0.19
2024-05-14 00:45:02 status half-configured pixflat-theme:arm64 0.17
2024-05-14 00:45:02 status unpacked pixflat-theme:arm64 0.17
2024-05-14 00:45:02 status half-installed pixflat-theme:arm64 0.17
2024-05-14 00:45:03 status unpacked pixflat-theme:arm64 0.19
2024-05-14 00:45:03 upgrade raspberrypi-ui-mods:arm64 1.20240510 1.20240513
2024-05-14 00:45:03 status half-configured raspberrypi-ui-mods:arm64 1.20240510
2024-05-14 00:45:03 status unpacked raspberrypi-ui-mods:arm64 1.20240510
2024-05-14 00:45:03 status half-installed raspberrypi-ui-mods:arm64 1.20240510
2024-05-14 00:45:03 status triggers-pending libglib2.0-0:arm64 2.74.6-2+deb12u2
2024-05-14 00:45:03 status triggers-pending shared-mime-info:arm64 2.2-1
2024-05-14 00:45:03 status unpacked raspberrypi-ui-mods:arm64 1.20240513
2024-05-14 00:45:04 startup packages configure
2024-05-14 00:45:04 configure pixflat-theme:arm64 0.19 <none>
2024-05-14 00:45:04 status unpacked pixflat-theme:arm64 0.19
2024-05-14 00:45:04 status half-configured pixflat-theme:arm64 0.19
2024-05-14 00:45:04 status installed pixflat-theme:arm64 0.19
2024-05-14 00:45:04 configure raspberrypi-ui-mods:arm64 1.20240513 <none>
2024-05-14 00:45:04 status unpacked raspberrypi-ui-mods:arm64 1.20240513
2024-05-14 00:45:04 status half-configured raspberrypi-ui-mods:arm64 1.20240513
2024-05-14 00:45:04 status triggers-awaited raspberrypi-ui-mods:arm64 1.20240513
2024-05-14 00:45:04 configure libdpkg-perl:all 1.22.6~bpo12+rpt1 <none>
2024-05-14 00:45:04 status unpacked libdpkg-perl:all 1.22.6~bpo12+rpt1
2024-05-14 00:45:04 status half-configured libdpkg-perl:all 1.22.6~bpo12+rpt1
2024-05-14 00:45:04 status installed libdpkg-perl:all 1.22.6~bpo12+rpt1
2024-05-14 00:45:04 configure dpkg-dev:all 1.22.6~bpo12+rpt1 <none>
2024-05-14 00:45:04 status unpacked dpkg-dev:all 1.22.6~bpo12+rpt1
2024-05-14 00:45:04 status half-configured dpkg-dev:all 1.22.6~bpo12+rpt1
2024-05-14 00:45:04 status installed dpkg-dev:all 1.22.6~bpo12+rpt1
2024-05-14 00:45:04 trigproc libglib2.0-0:arm64 2.74.6-2+deb12u2 <none>
2024-05-14 00:45:04 status half-configured libglib2.0-0:arm64 2.74.6-2+deb12u2
2024-05-14 00:45:04 status installed raspberrypi-ui-mods:arm64 1.20240513
2024-05-14 00:45:05 status installed libglib2.0-0:arm64 2.74.6-2+deb12u2
2024-05-14 00:45:05 trigproc man-db:arm64 2.11.2-2 <none>
2024-05-14 00:45:05 status half-configured man-db:arm64 2.11.2-2
2024-05-14 00:45:08 status installed man-db:arm64 2.11.2-2
2024-05-14 00:45:08 trigproc shared-mime-info:arm64 2.2-1 <none>
2024-05-14 00:45:08 status half-configured shared-mime-info:arm64 2.2-1
2024-05-14 00:45:16 status installed shared-mime-info:arm64 2.2-1
On this system, a service was set up and configured. Unfortunately, I was planning to make a full backup after installing the updates on the OS. Has anyone encountered this issue before, and are there any ways to get the system to boot?
On 05-14, I installed updates via GUI, after which Rasp OS stopped booting (not accessible over the network). Upon booting, it loads to a black screen with the "_" symbol and does not respond to any input. Without the SD card, the bootloader loads and attempts to boot from USB/SD or netboot. There is 37GB+ of free space on the SD card. I connected the card to a laptop with Debian, and both bootfs/rootfs partitions are intact. Here is the log of the updates installation:
2024-05-14 00:44:57 startup archives unpack
2024-05-14 00:44:58 upgrade dpkg:arm64 1.21.22 1.22.6~bpo12+rpt1
2024-05-14 00:44:58 status half-configured dpkg:arm64 1.21.22
2024-05-14 00:44:58 status unpacked dpkg:arm64 1.21.22
2024-05-14 00:44:58 status half-installed dpkg:arm64 1.21.22
2024-05-14 00:44:59 status triggers-pending man-db:arm64 2.11.2-2
2024-05-14 00:44:59 status unpacked dpkg:arm64 1.22.6~bpo12+rpt1
2024-05-14 00:44:59 startup packages configure
2024-05-14 00:44:59 configure dpkg:arm64 1.22.6~bpo12+rpt1 <none>
2024-05-14 00:44:59 status unpacked dpkg:arm64 1.22.6~bpo12+rpt1
2024-05-14 00:44:59 status half-configured dpkg:arm64 1.22.6~bpo12+rpt1
2024-05-14 00:45:00 status installed dpkg:arm64 1.22.6~bpo12+rpt1
2024-05-14 00:45:00 startup archives unpack
2024-05-14 00:45:00 upgrade dpkg-dev:all 1.21.22 1.22.6~bpo12+rpt1
2024-05-14 00:45:00 status half-configured dpkg-dev:all 1.21.22
2024-05-14 00:45:00 status unpacked dpkg-dev:all 1.21.22
2024-05-14 00:45:00 status half-installed dpkg-dev:all 1.21.22
2024-05-14 00:45:01 status unpacked dpkg-dev:all 1.22.6~bpo12+rpt1
2024-05-14 00:45:01 upgrade libdpkg-perl:all 1.21.22 1.22.6~bpo12+rpt1
2024-05-14 00:45:01 status half-configured libdpkg-perl:all 1.21.22
2024-05-14 00:45:01 status unpacked libdpkg-perl:all 1.21.22
2024-05-14 00:45:01 status half-installed libdpkg-perl:all 1.21.22
2024-05-14 00:45:02 status unpacked libdpkg-perl:all 1.22.6~bpo12+rpt1
2024-05-14 00:45:02 upgrade pixflat-theme:arm64 0.17 0.19
2024-05-14 00:45:02 status half-configured pixflat-theme:arm64 0.17
2024-05-14 00:45:02 status unpacked pixflat-theme:arm64 0.17
2024-05-14 00:45:02 status half-installed pixflat-theme:arm64 0.17
2024-05-14 00:45:03 status unpacked pixflat-theme:arm64 0.19
2024-05-14 00:45:03 upgrade raspberrypi-ui-mods:arm64 1.20240510 1.20240513
2024-05-14 00:45:03 status half-configured raspberrypi-ui-mods:arm64 1.20240510
2024-05-14 00:45:03 status unpacked raspberrypi-ui-mods:arm64 1.20240510
2024-05-14 00:45:03 status half-installed raspberrypi-ui-mods:arm64 1.20240510
2024-05-14 00:45:03 status triggers-pending libglib2.0-0:arm64 2.74.6-2+deb12u2
2024-05-14 00:45:03 status triggers-pending shared-mime-info:arm64 2.2-1
2024-05-14 00:45:03 status unpacked raspberrypi-ui-mods:arm64 1.20240513
2024-05-14 00:45:04 startup packages configure
2024-05-14 00:45:04 configure pixflat-theme:arm64 0.19 <none>
2024-05-14 00:45:04 status unpacked pixflat-theme:arm64 0.19
2024-05-14 00:45:04 status half-configured pixflat-theme:arm64 0.19
2024-05-14 00:45:04 status installed pixflat-theme:arm64 0.19
2024-05-14 00:45:04 configure raspberrypi-ui-mods:arm64 1.20240513 <none>
2024-05-14 00:45:04 status unpacked raspberrypi-ui-mods:arm64 1.20240513
2024-05-14 00:45:04 status half-configured raspberrypi-ui-mods:arm64 1.20240513
2024-05-14 00:45:04 status triggers-awaited raspberrypi-ui-mods:arm64 1.20240513
2024-05-14 00:45:04 configure libdpkg-perl:all 1.22.6~bpo12+rpt1 <none>
2024-05-14 00:45:04 status unpacked libdpkg-perl:all 1.22.6~bpo12+rpt1
2024-05-14 00:45:04 status half-configured libdpkg-perl:all 1.22.6~bpo12+rpt1
2024-05-14 00:45:04 status installed libdpkg-perl:all 1.22.6~bpo12+rpt1
2024-05-14 00:45:04 configure dpkg-dev:all 1.22.6~bpo12+rpt1 <none>
2024-05-14 00:45:04 status unpacked dpkg-dev:all 1.22.6~bpo12+rpt1
2024-05-14 00:45:04 status half-configured dpkg-dev:all 1.22.6~bpo12+rpt1
2024-05-14 00:45:04 status installed dpkg-dev:all 1.22.6~bpo12+rpt1
2024-05-14 00:45:04 trigproc libglib2.0-0:arm64 2.74.6-2+deb12u2 <none>
2024-05-14 00:45:04 status half-configured libglib2.0-0:arm64 2.74.6-2+deb12u2
2024-05-14 00:45:04 status installed raspberrypi-ui-mods:arm64 1.20240513
2024-05-14 00:45:05 status installed libglib2.0-0:arm64 2.74.6-2+deb12u2
2024-05-14 00:45:05 trigproc man-db:arm64 2.11.2-2 <none>
2024-05-14 00:45:05 status half-configured man-db:arm64 2.11.2-2
2024-05-14 00:45:08 status installed man-db:arm64 2.11.2-2
2024-05-14 00:45:08 trigproc shared-mime-info:arm64 2.2-1 <none>
2024-05-14 00:45:08 status half-configured shared-mime-info:arm64 2.2-1
2024-05-14 00:45:16 status installed shared-mime-info:arm64 2.2-1
On this system, a service was set up and configured. Unfortunately, I was planning to make a full backup after installing the updates on the OS. Has anyone encountered this issue before, and are there any ways to get the system to boot?
Statistics: Posted by infsecure — Tue May 14, 2024 7:51 pm — Replies 0 — Views 22