Hi @ll,
I am scratching my head because I have no clue whats wrong here.
I'm no noob. That's not the first Pi I am working with.
However.. going after the most straight forward installation guide, it anyway seems that I am unable to get that HAT working
The guides I followed:
https://www.raspberrypi.com/documentati ... stallation
https://github.com/hailo-ai/hailo-rpi5- ... leshooting
Right after upgrading the OS, making raspi-config, shutting down, installing the AI Kit I dont see it connecting.
It's the 26 TOPS version by the way.
What seems sus to me is the line with:
[ 1.503324] brcm-pcie 1000110000.pcie: Forcing gen 3
...
[ 1.554326] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.988421] brcm-pcie 1000110000.pcie: link down
This must be the port, but it seems that It's not detecting the Kit.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
(I already had it tightly screwed on all sides.. I just reassembled and started to show u guys it is connected..)
Installing the "hailo-all" package isn't helping, since the board is nowhere to be seen by the system.
I checked the PCIe Gen 3 setting multiple times.. trying switching it on and off.. nothing..
I also reinstalled the OS multiple times and checked the connection multiple times... nothing..
What I use to power:
Official 27w pi charger
The OS I am using: pi OS 64 bit lite (no desktop env)
I am scratching my head because I have no clue whats wrong here.
I'm no noob. That's not the first Pi I am working with.
However.. going after the most straight forward installation guide, it anyway seems that I am unable to get that HAT working
The guides I followed:
https://www.raspberrypi.com/documentati ... stallation
https://github.com/hailo-ai/hailo-rpi5- ... leshooting
Right after upgrading the OS, making raspi-config, shutting down, installing the AI Kit I dont see it connecting.
It's the 26 TOPS version by the way.
Code:
odin@aifred:~ $ lspci00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 30)01:00.0 Ethernet controller: Raspberry Pi Ltd RP1 PCIe 2.0 South Bridge[ 1.503324] brcm-pcie 1000110000.pcie: Forcing gen 3
...
[ 1.554326] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.988421] brcm-pcie 1000110000.pcie: link down
This must be the port, but it seems that It's not detecting the Kit.
Code:
odin@aifred:~ $ sudo dmesg | grep pci[ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave smsc95xx.macaddr=2C:CF:67:A8:4F:CE vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=dd2bdfa5-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE[ 1.460980] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges:[ 1.468168] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff][ 1.477260] brcm-pcie 1000110000.pcie: MEM 0x1b80000000..0x1bffffffff -> 0x0080000000[ 1.485564] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1b7fffffff -> 0x0400000000[ 1.493864] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000[ 1.503324] brcm-pcie 1000110000.pcie: Forcing gen 3[ 1.508479] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0000:00[ 1.514947] pci_bus 0000:00: root bus resource [bus 00-ff][ 1.520451] pci_bus 0000:00: root bus resource [mem 0x1b80000000-0x1bffffffff] (bus address [0x80000000-0xffffffff])[ 1.531020] pci_bus 0000:00: root bus resource [mem 0x1800000000-0x1b7fffffff pref] (bus address [0x400000000-0x77fffffff])[ 1.542206] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400[ 1.548251] pci 0000:00:00.0: PME# supported from D0 D3hot[ 1.554326] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring[ 1.988421] brcm-pcie 1000110000.pcie: link down[ 1.993110] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01[ 1.999760] pci 0000:00:00.0: PCI bridge to [bus 01][ 2.004758] pci 0000:00:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512[ 2.013328] pcieport 0000:00:00.0: PME: Signaling with IRQ 38[ 2.019158] pcieport 0000:00:00.0: AER: enabled with IRQ 38[ 2.024821] pci_bus 0000:01: busn_res: [bus 01] is released[ 2.030455] pci_bus 0000:00: busn_res: [bus 00-ff] is released[ 2.036391] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges:[ 2.043381] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff][ 2.052469] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000[ 2.060768] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000[ 2.069068] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000[ 2.077367] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000[ 2.086818] brcm-pcie 1000120000.pcie: Forcing gen 2[ 2.091821] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00[ 2.098292] pci_bus 0000:00: root bus resource [bus 00-ff][ 2.103802] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])[ 2.114372] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])[ 2.125560] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400[ 2.131604] pci 0000:00:00.0: PME# supported from D0 D3hot[ 2.137651] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring[ 2.252427] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)[ 2.259081] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000[ 2.265121] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff][ 2.271415] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff][ 2.277710] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff][ 2.284057] pci 0000:01:00.0: supports D1[ 2.288078] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold[ 2.304436] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01[ 2.311085] pci 0000:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff][ 2.318256] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff][ 2.325427] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff][ 2.332594] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff][ 2.339758] pci 0000:00:00.0: PCI bridge to [bus 01][ 2.344740] pci 0000:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff][ 2.351903] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512[ 2.360382] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512[ 2.368896] pcieport 0000:00:00.0: enabling device (0000 -> 0002)[ 2.375034] pcieport 0000:00:00.0: PME: Signaling with IRQ 39[ 2.380841] pcieport 0000:00:00.0: AER: enabled with IRQ 39Clik here to view.
Image may be NSFW.
Clik here to view.
(I already had it tightly screwed on all sides.. I just reassembled and started to show u guys it is connected..)
Installing the "hailo-all" package isn't helping, since the board is nowhere to be seen by the system.
I checked the PCIe Gen 3 setting multiple times.. trying switching it on and off.. nothing..
I also reinstalled the OS multiple times and checked the connection multiple times... nothing..
What I use to power:
Official 27w pi charger
The OS I am using: pi OS 64 bit lite (no desktop env)
Statistics: Posted by W0nderW0lf — Fri Dec 06, 2024 2:08 pm — Replies 0 — Views 9
