I have successfully set up my Raspberry Pi that can log voltages to a csv file using the MCP3008 installed on a breadboard viewtopic.php?p=2247421#p2245977
However, my question is how does one wire up the MCP3008 on the breadboard to be able to read from 4 channels? I hope to be able to log voltages from 4 separate sources into 1 CSV file with the date and time in rows and then the channel listing in columns. This is something i can work myself. But I am unsure how one would go about wiring the breadboard to allow the MCP3008 to read at least 4 different channels from 4 different voltage sources.
Thank you for your help and advice.
However, my question is how does one wire up the MCP3008 on the breadboard to be able to read from 4 channels? I hope to be able to log voltages from 4 separate sources into 1 CSV file with the date and time in rows and then the channel listing in columns. This is something i can work myself. But I am unsure how one would go about wiring the breadboard to allow the MCP3008 to read at least 4 different channels from 4 different voltage sources.
Thank you for your help and advice.
Statistics: Posted by KittyBopMeep — Thu Jan 02, 2025 3:14 pm — Replies 1 — Views 45