Question: Is there a place on the PCB where I can extract the 54MHz clock signal from the RaspberryPi4?
Background: If I'm able to extract the 54MHz clock I'll feed it into a fast opamp and use that as a CLK source for an external software defined radio. With this hardware-only approach, delays caused by software (including interrupts etc.) are prevented.
Thanks for sharing your thoughts.
Background: If I'm able to extract the 54MHz clock I'll feed it into a fast opamp and use that as a CLK source for an external software defined radio. With this hardware-only approach, delays caused by software (including interrupts etc.) are prevented.
Thanks for sharing your thoughts.
Statistics: Posted by Rbert — Fri Jan 03, 2025 8:36 pm — Replies 1 — Views 22