Hello,
I have a CM4 mounted on a the standard CM4 IO Board. When I run rpiboot on either Ubuntu 22.04 or Windows 11 I get some funny messages and the eMMC does not show up as an SD card. Windows Device Manager says "Device Descriptor Request Failed". Linux just doesn't show a /dev/sdx device.
Here are the rpiboot messages. It complains about config.txt, pieeprom.sig and fixup4.dat. This is from Windows but in Linux I run the command as root and get the same messages.
Any advice is appreciated.
I have a CM4 mounted on a the standard CM4 IO Board. When I run rpiboot on either Ubuntu 22.04 or Windows 11 I get some funny messages and the eMMC does not show up as an SD card. Windows Device Manager says "Device Descriptor Request Failed". Linux just doesn't show a /dev/sdx device.
Here are the rpiboot messages. It complains about config.txt, pieeprom.sig and fixup4.dat. This is from Windows but in Linux I run the command as root and get the same messages.
Any advice is appreciated.
Code:
PS C:\Program Files (x86)\Raspberry Pi> .\rpibootRPIBOOT: build-date Dec 19 2023 version 20221215~105525 62ce49c0Waiting for BCM2835/6/7/2711/2712...Loading embedded: bootcode4.binSending bootcode.binSuccessful read 4 bytesWaiting for BCM2835/6/7/2711/2712...Loading embedded: bootcode4.binSecond stage boot server[b]Cannot open file config.txtCannot open file pieeprom.sig[/b]Loading embedded: start4.elfFile read: start4.elf[b]Cannot open file fixup4.dat[/b]Second stage boot server doneStatistics: Posted by pedro_uno — Fri Mar 29, 2024 7:56 pm — Replies 0 — Views 24